Adhesive bonding of dissimilar substrates is a widely used joining technique in the automotive industry. Surface functionalization methods such as activation or chemical priming are often required to ensure a long-lasting bond. The technologies commonly used for this purpose have significant limitations:

• use of toxic solvents
• manual or semi-manual operation
• limited operating window due to time constraints
• limited repeatability and reliability due to difficulty to control processes
• impossibility to have inline quality control and/or inspection
• insufficient performance on materials such as polyolefins and elastomers
• insufficient performance on materials such as polyolefins and elastomers

Our technology solves all of these limitations:

• zero-emission process
• fully automatable
• full SPC
• 100% inspection possible
• permanent surface modification ⏩ no time constraints

See Surface Functionalities for an overview of the solutions we can offer with our technology.

If you have a special question or need a specific surface functionality for your product, please call us at +352 54 55 80 461 or reach us through the contact form.

Adhesive bonding of dissimilar substrates is a widely used joining technique in the aerospace industry. Surface functionalization methods such as activation or chemical priming are often required to ensure a long-lasting bond. The technologies commonly used for this have significant limitations:

• use of toxic solvents
• manual or semi-manual operation
• limited operating window due to time constraints
• limited repeatability and reliability due to difficulty to control processes
• impossibility to have inline quality control and/or inspection
• insufficient performance on materials such as polyolefins and elastomers

Our MolecularGrip™ technology solves all of these limitations:

• zero-emission process
• fully automatable
• full SPC
• 100% inspection possible
• permanent surface modification ⏩ no time constraints

Furthermore, our technology enables the development of next generation advanced composites by increasing the strength of the bond between the fibre material (carbon, polyolefin, polyester, natural, ...) and the polymer matrix. See Advanced composites section.

See Surface Functionalities for an overview of the solutions we can offer with our technology.

If you have a special question or need a specific surface functionality for your product, please call us at +352 54 55 80 461 or reach us through the contact form.

One of the main challenges facing manufacturers of advanced composite materials is the adhesive bond between the various components of the material or structure.

Our MolecularGRIP™ technology enables solvent-free sizing of highly inert, as well as highly sensitive materials, to significantly increase the strength of the bond between the fibres (carbon, polyolefin, polyester, natural, ...) and the polymer matrix.

Our technology offers major advantages over others for surface priming to improve adhesive joining of dissimilar materials as we are able to easily join materials such as:

• CFC to metal
• Teflon to other materials
• Elastomers to metal
• PU to glass, PMMA or metal
• PU to PP
• Acryilic to PP
• and many more

See Surface Functionalities for an overview of the solutions we can offer with our technology.

If you have a special question or need a specific surface functionality for your product, please call us at +352 54 55 80 461 or reach us through the contact form.

Our MolecularGrip™ helps manufacturers of electronic components, flexible electronics, 5G systems, etc. overcome a wide range of adhesion challenges.

Because our technology operates at ambient temperature and no sparks are generated during the creation of the plasma, it is the ultimate reliable, safe, and easily scalable technology for the electronics industry.

See Surface Functionalities for an overview of the solutions we can offer with our technology.

If you have a special question or need a specific surface functionality for your product, please call us at +352 54 55 80 461 or reach us through the contact form.

Within the Healthcare industry, there is a substantial need to functionalise surfaces, improving efficiency and effectiveness of products.

We have extensive experience in three of the main Healthcare segments:

Our technology can help healthcare companies in many different sectors with a range of value-adding functionalities:

• Better substrate adhesion
• Anti-biofouling
• Biomolecule immobilization
• Antimicrobial & antiviral coatings
• Improved & stable wettability
• Cell adhesion

See Surface Functionalities for an overview of the solutions we can offer with our technology.

If you have a special question or need a specific surface functionality for your product, please call us at +352 54 55 80 461 or reach us through the contact form.

The packaging industry has a wide range of surface functionalisation needs. Technologies such as corona treatment are well known and widely used. When your needs cannot be met by commonly available surface activation technologies, it is time to talk to us.

Making us unique in this industry, we offer homogeneous treatment of surfaces up to a width of 1,2 m at speeds of up to 50 m/min.aaa

See Surface Functionalities for an overview of the solutions we can offer with our technology.

If you have a special question or need a specific surface functionality for your product, please call us at +352 54 55 80 461 or reach us through the contact form.

What these industries all have in common, is that they work with substrates sensitive to:

• Temperature
• Solvents
• Need to maintain the pore size

Making us unique in the industry, our technology will not damage or alter the base material in any way. We simply graft a nanometric layer of the desired functionality to the surface with a solvent-free, cold atmospheric, scalable process. We offer homogeneous treatment of surfaces up to a width of 1,2 m at speeds of up to 50 m/min.

See Surface Functionalities for an overview of the solutions we can offer with our technology.

If you have a special question or need a specific surface functionality for your product, please call us at +352 54 55 80 461 or reach us through the contact form.

The technical textiles industry has a wide range of surface functionalisation needs. If your functionalisation needs cannot be met by commonly available surface technologies, it is time to talk to us.

Making us unique in the industry, we offer homogeneous treatment of surfaces up to a width of 1,2 m at speeds of up to 50 m/min.

See Surface Functionalities for an overview of the solutions we can offer with our technology.

If you have a special question or need a specific surface functionality for your product, please call us at +352 54 55 80 461 or reach us through the contact form.